logo_CIMDD2017

Planning

Monday, November 6, 2017

Time Event  
15:00 - 21:00 Welcome Reception - Participants' registrations (Reception Hall (Central Library) - Univ. Boumerdes) - Organization Committee of 3rd ISMSD2017  

Tuesday, November 7, 2017

Time Event  
08:00 - 09:15 Opening Official of ISMSD 2017 symposium (Conference Room - Boumerdes University)  
09:15 - 10:00 Opening Official of ISMSD 2017 symposium (Conference Room - Boumerdes University) - Pr. A. BENTELLIS (Rector of Boumerdes University), Pr. A. ZERIZER, Pr. A. BENMOUNAH, Pr. M. HACHEMI and Dr. A. DAOUI  
10:00 - 10:30 Plenary Conference (Conference Room - Boumerdes University) - Chairman: Pr. Abdellatif ZERIZER  
10:00 - 10:30 › FUNCTIONAL NANO-OXIDES: PROPERTIES AND APPLICATIONS - Bououdina Mohamed, Department of Physics, College of Science, University of Bahrain, Kingdom of Bahrain  
10:30 - 11:00 Coffee break (HALL 1)  
11:00 - 12:00 Plenary Conference (Conference Room - Boumerdes University) - Chairman: Pr. Mohammed SAIDI  
11:00 - 11:30 › NANOCATALYSIS SUPPORTED ON GRAPHENE AND METAL-ORGANIC FRAMEWORKS FOR CLEAN ENERGY AND ENVIRONMENTAL APPLICATIONS - Mohamed Samy El-Shall, Virginia Commonwealth University, USA  
11:30 - 12:00 › RESPONSE SURFACE METHODOLOGY FOR OPTIMIZATION OF LIPASE IMMOBILIZATION CONDITIONS ON NANOFIBERS GRAFTED WITH POLYGLYCIDYL METHACHRYLATE (PGMA) - MA'AN FAHMI RASHID AL-KHATIB, International Islamic University of Malaysia, Malaysia  
12:00 - 13:00 Lunch (Restaurant -Hotel)  
13:25 - 15:00 Topic 1: Advanced Materials and Nanotechnology (Salle A) - Chairman: Pr. K. Boumchedda, Pr. M. Bououdina and Dr. N.H. Kamel  
13:25 - 13:45 › RECENTS TRENDS IN FAST CONFOCAL RAMAN MICROSCOPY AND RAM SEM CORRELATIVE MICROSCOPY - Philippe Ayasse, WITec GmbH (Germany)  
13:45 - 14:00 › Recycled CRT based glass foams for high power microwave terminations - Ratiba Benzerga, IETR-Université de Rennes 1  
14:00 - 14:15 › Physico-chemical characterization and in vitro bioactivity of pearl powder - Naima AKILAL, Université Abderahmane Mira de Béjaia  
14:15 - 14:30 › Comparative study of bioactive glass obtained by xerogel and aerogel on their structure, morphology and bioactivity - Dalila KSOURI, University of Bejaia  
14:30 - 14:45 › Structural and optical properties of porous amorphous silicon carbide thin films for environment application - Assia BOUKEZZATA, CRTSE - Alger  
14:45 - 15:00 › ELABORATION ET CARACTERISATION D'UN BIOCOMPOSITE (DSEAV/AC) : APPLICATION A LA BIOSORPTION DU Cd (II). - Loubna TAIBA, Centre de Recherche Scientifique et Technique en Analyses Physico-Chimiques  
13:25 - 15:00 Topic 2: Materials Chemistry and Building Materials (Salle B) - Chairman: Pr. A. Yahia, Pr. A. Benmounah and Pr. T.H. Daouadji  
13:25 - 13:45 › RELIABLE TEST RESULTS ARE A FUNDAMENTAL AND HIGHLY TOPICAL ASPECT OF MATERIALS TESTING - Helmut Fahrenholz, Zwick Roell Group (Germany)  
13:45 - 14:00 › Contribution to the modeling of a composite steel-concrete columns - Nacer RAHAL, Mustapha Stambouli University of Mascara  
14:00 - 14:15 › Expérimentation et simulation d'un prototype d'architecture durable en milieux arides et semi arides. - Laouni Ines, LACOMOFA, Université de Biskra  
14:15 - 14:30 › MECHANICAL BEHAVIOR AND DURABILITY OF LATEX MODIFIED MORTARS - Yacine Benali, University Abou Bekr Belkaid, Tlemcen  
14:30 - 14:45 › CORROSION BEHAVIOR OF REINFORCING STEEL IN CONCRETE ELEMENTS IN ALKLINE MEDIUM - Nadjette Bourenane, University of Mohamed Chérif Messaadia, Souk-Ahras  
14:45 - 15:00 › L'EFFET DE L'EAU SUR LES MATERIAUX ROUTIERS(ENROBE BITUMINEUX)CAS D'UN TRONÇON DE LA RN25 DE TIZI OUZOU - Saida HADJ ABDERRAHMANE, Laboratoire de Recherche Géomatériaux, Environnement et Aménagement  
13:25 - 15:00 Topic 3: Waste Management, Recycling and Environment (Salle C) - Chairman: Pr. F. Charrier, Pr. Y. Ghernouti and Dr. C. Franzen  
13:25 - 13:45 › Determination of the Aging Resistance of Polymers and Hydrocarbons with Standardized Tests for Thermo-Oxidative Aging, OIT/OOT Determination with Differntial Scanning Calorimeter (DSC) - Juergen Janoschek, NETZSCH (Germany)  
13:45 - 14:00 › Partial substitution of cement by treated sediment in SCC'S formulation - Khalil Belguesmia  
14:00 - 14:15 › PHYSICAL AND MECHANICAL PROPERTIES OF SELF COMPACTING MORTARS CONTAINING VARIOUS THERMOPLASTIC AGGREGATES - Chouiha Boubekeur, Université de Mascara  
14:15 - 14:30 › Application de la méthode de plans d'expériences pour l'optimisation des paramètres d'activation thermique des argiles. - Messaouda Laidi, Laboratoire de Matériaux et Réhabilitation de Structures  
14:30 - 14:45 › GLASS FOAM COMPOSITES BASED ON USED TIRES FOR MICROWAVE ABSORBING APPLICATION - Younes Lamri, Unité de recherche : Matériaux, procédés et environnement  
14:45 - 15:00 › ELIMINATION DES PESTICIDES PAR OXYDATION ELECTROCHIMIQUE EN UTILISANT UNE ANODE DE DIAMANT DOPEE AU BORE - AIMER Yassine, Département de Génie des procédés  
13:25 - 15:00 Topic 4: Materials Processing Technology (Salle D) - Chairman: Prof. C. Derail, Pr. A. Bezazi and Pr. N. Djelali  
13:25 - 13:45 › Tous les bénéfices de la microscopie optique, électronique, ionique et rayons X et de leur corrélation - Martin Tremblay, ZEISS International, optical and optoelectronic technology (Germany)  
13:45 - 14:00 › REDOX BEHAVIOR OF A SERIES OF BISCYCLOPENTADIENYL URANIUM (IV) COMPLEXES: RELATIVISTIC DFT INVESTIGATION - Farida Kias, Université Mouloud Mammeri de Tizi Ouzou  
14:00 - 14:15 › Caractérisation du comportement mécanique des aciers inoxydables entièrement austénitiques sous différentes températures. - Zehra SIDHOUM, Université Mouloud MAMMERI de Tizi-Ouzou  
14:15 - 14:30 › EFFECT OF GAS-CARBURIZING PROCESS ON THE SURFACE HARDENING OF TITANIUM AND STAINLESS STEEL ALLOYS - Saber BOUAROURI, École Nationale Supérieure des Mines et Métallurgie - Annaba  
14:30 - 14:45 › MATERIAUX POLYMERES A ARCHITECTURES COMPLEXES SYNTHESE ET CARACTERISATION - Nabila Cherifi, Laboratoire de Synthèse Macromoléculaire et Thio-Organique Macromoléculaire, USTHB  
14:45 - 15:00 › étude numérique sur l'effet de la morphologie urbaine sur les fluctuations thermiques de la rue et le confort thermique extérieur - Sara Sedira, Université Mohamed Khider Biskra  
13:45 - 15:00 Poster Session (Salle - RDC) - Poster Session I  
15:00 - 15:30 Coffee break (HALL 2)  
15:30 - 17:30 Topic 1: Advanced Materials and Nanotechnology (Salle A) - Chairman: Pr. A. Ayadi, Dr. R. Benzerga and Dr. R. Tala ighil  
15:30 - 15:45 › NOVEL PHOTONIC CRYSTALS OF POLYMETHYL METHACRYLATE NANOSPHERES WRAPPED WITH GRAPHENE OXIDE NANOSHEETS - Mohamed Samy El-Shall, Virginia Commonwealth University  
15:45 - 16:00 › TiO2 nanofibers supported on Ti sheets prepared by hydrothermal corrosion: effect of the microstructure on their photochemical and photoelectrochemical properties - Samiha Chaguetmi, Université 20 Août 1955 de Skikda  
16:00 - 16:15 › FACILE FABRICATION OF INVERSE OPAL FILMS OF TRANSITION METAL OXIDES FOR APPLICATION IN CHROMOGENIC DEVICES - Yahia Djaoued, Université de Moncton - Campus de Shippagan  
16:15 - 16:30 › Improving heterogeneous magnetic Fenton catalytic degradation of aqueous dyes with a simple halogen visible lamp through Iron-Oxide/Silica Nanocomposites - Nassira FERROUDJ, Université du 20 Août 1955 de Skikda  
16:30 - 16:45 › Flammability Behavior of Polypropylene/Polyamide66/Nanoclay Nanoblend - Benalia Kouini, University M'hamed Bougara of Boumerdes  
16:45 - 17:00 › Cu-doping Impact on Magneto-Resistivity and Temperature Coefficient of Resistivity in La-Ca Layered Manganites - Nabil Mahamdioua, LEND Laboratory, Jijel University  
17:00 - 17:15 › Electrodéposition et caractérisation des couches minces d'oxydes de bismuth - Salem BOUDINAR, Laboratoire de Physique et Chimie des Matériaux (LPCM)  
17:15 - 17:30 › TEMPLATE OPTIMIZATION OF BLOCK COPOLYMER THIN FILMS BY SELF-ASSEMBLY PROCESS - Mohamed Loucif Seiad, Université Amar Telidji - Laghouat  
15:30 - 17:30 Topic 2: Materials Chemistry and Building Materials (Salle B) - Chairman: Pr. A. LI, Pr. R. Chaid and K. Ait-Tahar  
15:30 - 15:45 › MECHANICAL STRENGTHS OF MODIFIED PET MORTAR COMPOSITES IN AGGRESSIVE MgSO4 MEDIUM: ACI & B.S PREDICTIONS - Nabil Kazi Tani, LCGE Laboratory, Superior School of Applied Sciences  
15:45 - 16:00 › Lipophilic and hydrophilic extractives from two Algerian tree species - Nacera Benouadah, Research Unit, Materials, Processes and Environment (UR-MPE)  
16:00 - 16:15 › Effet des ajouts minéraux sur les propriétés physico-mécaniques des briques de terre comprimée à base d'un sol portant de sulfate - Izemmouren Ouarda, Laboratoire de Recherche en Génie Civil-Université de Biskra  
16:15 - 16:30 › ASSESSMENT OF GAS PERMEABILITY OF UNSATURATED ORDINARY CONCRETE: INFLUENCE OF SATURATION DEGREE AND MIXTURE PARAMETERS. - Zine El Abidine Kameche, Abou Bekr Belkaid University, Tlemcen  
16:30 - 17:00 › PROPOSITION D'UN TEST D'EVALUATION DE LA STABILITE STATIQUE DES BAP A L'ETAT FRAIS - Mohamed Sahraoui, Laboratoire de Matériaux et Réhabilitation de Structures  
17:00 - 17:15 › The impact of passive cooling roof techniques on thermal behavior of residential buildings in hot and arid regions: an experimental study - Wafa Athmani, LACOMOFA Laboratory-Univ. Biskra (Algeria)  
17:15 - 17:30 › COMPORTEMENT AU FEU DES POTEAUX EN TUBE D'ACIER REMPLIS DE BETON. - Farid FELLAH, Badji Mokhtar University  
15:30 - 17:30 Topic 3: Waste Management, Recycling and Environment (Salle C) - Chairman: Pr. M. Hachemi, Pr. K. Louhab and Dr. M.Z Messaoud-Bouraghda  
15:30 - 15:45 › SYNTHESE ET CARACTERISATION D'UNE VITROCERAMIQUE RICHE EN FER DESTINE AU CONFINEMENT DES DECHETS RADIOACTIFS A VIE LONGUE (HLW) - Dalila MOUDIR, Centre de Recherche Nucléaire d'Alger  
15:45 - 16:00 › ETUDE DES PROPRIETES THERMIQUES ET DE LA BIODEGRADATION AVANT ET APRES LA COMPATIBILISATION DES MELANGES A BASE D'UN BIOMATERIAU POLYACIDE LACTIQUE ET DE POLYCARBONATE - Nadjet Chelghoum, Laboratory of physico-chimestry of hight polymer  
16:00 - 16:15 › INVESTIGATE METHOD TO REDUCE METHANE EMISSION DURING MAINTENANCE OPERATIONS FROM ALGERIAN NATURAL GAS TRANSPORTATION - Mounia Louhibi-Bouiri, Research Unit Materials, Processes and Environment  
16:15 - 16:30 › Effect of chemical activation on the surface properties of apricot stones based Activated carbons and its adsorptive properties toward Aniline - Zoubida KECIRA, Laboratoire d'Etude physico-chimique des matériaux et applications à l'environnement.  
16:30 - 16:45 › EFFECT OF VEGETABLE FIBER'S NATURE ON MECHANICAL PERFORMANCE AND TRANSFER PROPERTIES OF MORTARS CONTAINING METAKAOLIN - Ahmed Abderraouf Belkadi, University Mohamed khider of Biskra  
16:45 - 17:00 › DEMINERALIZATION EFFECT ON THE PHYSICOCHEMICAL AND INTERFACIAL PROPERTIES OF SWEET WHEY - Kamel ACEM, Ibn Khaldoun University of Tiaret  
17:00 - 17:15 › Kinetic and thermodynamic study of the adsorption of N.E.T in an aqueous medium on an agricultural by-product. - Bahdja HAYOUN, Chemistry laboratory  
17:15 - 17:30 › NANOFILTRATION PROCESS PERFORMANCE FOR THE SYNTHETIC AND BRACKISH WATER DEFLUORIDATION: APPLICATION TO SOUTH-ALGERIA'S WATER - Amina RAMDANI, University Dr. Moulay Tahar - Saida  
15:30 - 17:30 Topic 4: Materials Processing Technology (Salle D) - Chairman: Pr. B. Bezzazi, Pr. A. Oudia and Pr. K. Mohammedi  
15:30 - 15:45 › Low velocity impact response of thermoplastic laminates subjected to static indentation - Mahdad M'hamed, University Of Boumerdes  
15:45 - 16:00 › Magnetic moment of L10 FePt: perfect and defect surfaces - Hammar katia, Université Mouloud MAMMERI Tizi-Ouzou  
16:00 - 16:15 › THE EFFECT OF THE CATALYST ON THE MORPHOLOGY OF THE HYBRID MIXTURE BASED ON PVA Al 2 O 3 - Ali Zerriouh, University Ferhat Abbas of sétif  
16:15 - 16:30 › INFLUENCE DE LA TENEUR EN BENTONITE ET TAILLE DES GRAINS SUR LE COMPORTEMENT MECANIQUE DES MELANGES SABLE-BENTONITE - MEROUANE Mekkakia Maaza, Université Hassiba Benbouali de Chlef  
16:30 - 16:45 › INFLUENCE DE LA SEQUENCE D'EMPILEMENT ET DE L'ORIENTATION DES FIBRES SUR LA RIGIDITE DES PLAQUES EN COMPOSITES - Abdelghani Belkadi, Laboratoire de Mécanique Avancée (LMA) – USTHB  
16:45 - 17:00 › COMPRESSIVE BEHAVIOR OF SAND-CONCRETE FILLED STEEL TUBULAR COLUMNS - Wafa Madi,  
17:00 - 17:15 › Studies on graft copolymerization of recovered cellulose based on natural waste with acrylic monomer - Khaled Beyaz, Ecole préparatoire science et technique d'Alger  
17:15 - 17:30 › A FIVE-VARIABLE REFINED PLATE THEORY FOR BUCKLING BEHAVIOUR OF FUNCTIONALLY GRADED MATERIAL (FGM) SANDWICH PLATES SUBJECTED TO COMPRESSIVE LOADS - ahmed hamidi, Université Tahri Mohammed Béchar  
15:30 - 17:30 Poster Session (Salle - RDC) - Poster Session II and III  

Wednesday, November 8, 2017

Time Event  
08:30 - 09:30 Plenary Conference (Salle A) - Chairman: Pr. Abdelazziz TAIRI  
08:30 - 09:15 › PREPARATION OF AN HYBRID COMPOSITE MATERIAL WITH A CO-KNEADER : INFLUENCE OF PROCESSING PARAMETERS ON THE PROPERTIES - Christophe DERAIL, Laboratoire Informatique de lÚniversité de Pau et des Pays de lÁdour  
09:30 - 11:00 Topic 1: Advanced Materials and Nanotechnology (Salle A) - Chairman: Pr. M. Hamiane, Pr. A. Ayadi and Dr. N. Dokhane  
09:30 - 09:45 › Analysis of inhomogeneous domains and anisotropic inclusions by the boundary element method - Mohamed Rida Seba,  
09:45 - 10:00 › SELF-ASSEMBLY MONOLAYERS OF BUTANETHIOL FILMS AS FUNCTIONAL MOLECULES ON GOLD SUBSTRATE - Mohamed Loucif Seiad, Université Amar Telidji - Laghouat  
10:00 - 10:15 › Ethanol chemical sensor based on Ni-doped SnO2 thin films - Rechem Djamil, University Larbi Ben M'hidi Oum El Bouaghi  
10:15 - 10:30 › IMPROVING THE POWER EFFICIENCY OF ORGANIC PHOTOVOLTAIC CELLS WITH P3HT: ICBA USED AS ACTIVE LAYER - Ourida OURAHMOUN, University Mouloud MAMMERI of Tizi-OuZou  
10:30 - 10:45 › Water Vapor Permeability (WVP) and antibacterial properties of ternary melt blend based on Poly (Lactic Acid) /Chitosan and Cloisite 30B - Abdenour CHENNI, Laboratoire des Matériaux Polymères Avancés  
10:45 - 11:00 › Graphene-modified Bioanode for Enhancing the Electronic Conduction and the Biocompatibility of Microbial Fuel Cells - Tadji Asma, Université des Sciences et de la Technologie Mohamed Boudiaf - Oran  
09:30 - 11:00 Topic 2: Materials Chemistry and Building Materials (Salle B) - Chairman: Pr. A. Bali, Pr. Y. Ghernouti and R. Chaid  
09:30 - 09:45 › Etude du comportement des mélanges (marne-chaux) dans le domaine routier - Micipsa Lasheb,  
09:30 - 09:45 › L'EFFET DE CHOIX DES MATERIAUX DE CONSTRUCTION SUR LE CONFORT THERMIQUE DANS L'HABITAT INDIVIDUEL AUTO CONSTRUIT A BISKRA. - Sihem Latreche, Laboratoire de Conception et de Modélisation des Formes et des Ambiances  
09:45 - 10:00 › Evaluation of materials' effect on cooling energy demand: case study of an urban district in a hot arid zone. - Sara Ouanes, LACOMOFA - Université de Biskra  
10:00 - 10:15 › FOLLOW-UP OF THE DAMAGE EVOLUTION OF CROSS-PLY LAMINATES SUBJECTED TO FATIGUE TEST UNDER 3-POINTS BENDING - Abderrezak BEZAZI, Laboratoire de Mécanique Appliquée des Nouveaux Matériaux (LMANM), Université de Guelma  
10:15 - 10:30 › DEVELOPMENT OF MATERIALS BASED ON PET-SILICEOUS SAND COMPOSITE AGGREGATES - Mohammed Touhami GOUASMI, University of Oran 1,  
10:30 - 10:45 › EXPERIMENTATION OF A NOVEL COMPOSITE PHASE CHANGE MATERIAL FOR THERMAL COMFORT IMPROVEMENT AND ENERGY SAVING IN BUILDINGS. - Lisa BOUSSABA, Environment and Technology for Architecture and Patrimonium  
10:45 - 11:00 › STUDY OF MORTARS MADE WITH NATURAL AND ARTIFICIAL POZZOLANA - Laïd laoufi, University of Mascara  
09:30 - 11:00 Topic 3: Waste Management, Recycling and Environment (Salle C) - Chairman: Pr. K. Louhab, Pr. M. Sonebi and Dr. R. Bouras  
09:30 - 09:45 › Transport d'un polluant en milieu poreux : étude de perméabilité d'un sol alluvionnaire - Ryma Afiri, Université Mouloud Mammeri de Tizi-Ouzou  
09:45 - 10:00 › Removal of Ponceau S from synthetic solution by adsorption onto phosphate-modified alumina - FLILISSA Abdenacer,  
10:00 - 10:15 › Effect of crushed brick waste as fine powder in Performance of cement mortar - BOUKHELKHAL Djamila, GMGC Laboratory  
10:15 - 10:30 › REMOVAL OF MALACHITE GREEN FROM WATER BY ELECTROCOAGULATION USING IRON ELECTRODES - Abdellah Aissa, Centre de Recherche Scientifique et Technique en Analyses Physico-Chimiques  
10:30 - 10:45 › Production of baker's yeast from Saccharomyces cerevisiae using prickly pear peel (Opuntia ficus indica) as an alternative to pulp juice - Naàssa Diboune, University of Mohamed El Bachir El Ibrahimi  
10:45 - 11:00 › Photocatalytic Solar Degradation of Antibiotic Aqueous Solution by ZnO nano-material - Hiba KAIS, University of Sciences and Technology Houari-Boumediene  
09:30 - 11:00 Topic 4: Materials Processing Technology (Salle D) - Chairman: Pr. A. Benmounah, Pr. D. Aliouche and Pr. B. Chemani  
09:30 - 09:45 › Segregation of AN69 anionic copolymer on the surface of Polysulfone-based membrane and functionalization of the anionic surface by electrostatic interaction with polycation - Adel Ouradi, Université des Sciences et Technologie Houari Boumediene  
09:45 - 10:00 › Étude des propriétés diélectriques des couches minces organiques électro-déposées sur un substrat métallique pour des taux de couverture différents: Application aux revêtements dodécanethiol /or - Safia Hadjimi, Université de M'Hamed Bougara Boumerdes  
10:00 - 10:15 › Investigation of glow peaks 4 and 5 properties in test bleaching. - Mokhtar Halimi, University of Sciences and Technology of Oran (USTO-MB)  
10:15 - 10:30 › SYNTHESIS OF ACTIVATED CARBON PREPARED FROM AGRICULTRAL WASTE - Meryem Khellouf, University of Science and Technology Houari Boumediene  
10:30 - 10:45 › MECHANICAL CHARACTERIZATION OF BEHAVIOR OF GALVANIZED STEEL SHEET AND NUMERICAL SIMULATION OF PUNCHING PROCEEDING - Zerouki Marzak, University of Tizi-Ouzou  
10:45 - 11:00 › Nouvelle conception des nouvelles structures pour réduire les concentrations des contraintes interfaciales: Modèle multicouches amélioré - Bachir KERBOUA, University of Tlemcen  
09:30 - 11:00 Poster Session (Salle - RDC) - Poster Session IV  
11:00 - 11:30 Coffee break (HALL 1)  
11:30 - 12:30 Topic 1: Advanced Materials and Nanotechnology (Salle A) - Chairman: Pr. A. Azzeddine, Dr. F. Bensouici and Dr. F. R. Al-Khatib  
11:30 - 11:45 › ARTIFICIAL METAMATERIALS FOR DESIGN HIGH EFFICIENCY SOLAR CELLS - Hamouche Houria, Centre de Développement des Energies Renouvelables  
11:45 - 12:00 › Green route to produce adipic acid on supported gold nanoparticles - NAWEL AMEUR, Catalyse hétérogène  
12:00 - 12:15 › Magnetic and dielectric behavior of the metal- dielectric composite near the percolation threshold - Mohamed Mokhtari, Centre Universitaire de Tissemsilt  
11:30 - 12:30 Topic 2: Materials Chemistry and Building Materials (Salle B) - Chairman: Pr. A. LI, Pr. S. Kanai and Pr. M. Mouli  
11:30 - 11:45 › Etude du Comportement du béton armé dans un environnement agressif - Nassima KHIAL, Laboratoire Géo matériaux, Environnement et Aménagement Université Mouloud Mammeri de Tizi-Ouzou  
11:45 - 12:00 › Contribution à l'amélioration des propriétés rhéologiques des pâtes cimentaire - Abdel hamid Nefoussi, Saad Dahlab University of Blida  
12:00 - 12:15 › Formulation de mortier auto-plaçant à base de granulats recyclés issus du broyages des déchets plastiques - Boubakeur Chouiha, Université Mustapha Stambouli de Mascara  
12:15 - 12:30 › Effect of the treated mud rate on the mechanical performance of self-compacting concretes at early age - Belas Nadia, University of Mostaganem  
11:30 - 12:30 Topic 3: Waste Management, Recycling and Environment (Salle C) - Chairman: Pr. K. Louhab, Pr. M. Hachemi and Dr. Bouraghda  
11:30 - 11:45 › ENHANCING THE BIOMETHANE PRODUCTION FROM TANNERY WASTEWATER BY THERMAL, ALKALINE AND THERMOALKALINE PRETREATMENT - Ouafa ACHOURI, University of Constantine 3  
11:45 - 12:00 › Recyclage des déchets plastiques et valorisation du matériau argileux dans le domaine routier. - Oum Essaad Ouaaz, Université MOULOUD Mammeri de Tizi Ouzou  
12:00 - 12:15 › Valorisation et Caractérisation des Boues d'une Station de Lagunage Naturelle - Nour El Houda Larbi, Laboratoire de Structure, Elaboration et Applications des Matériaux Moléculaires (S.E.A.2M.),  
12:15 - 12:30 › THE EFFECT OF POLYPROPYLENE FIBERS ON MECHANICAL AND ELASTIC PROPERTIES OF RECYCLED ASPHALT CONCRETES - Rim LARBI, Laboratoire Matériaux de Génie Civil et Environnement, Ecole Nationale Polytechnique  
11:30 - 12:30 Topic 4: Materials Processing Technology (Salle D) - Chairman: Pr. D. Achoura, Pr. R. Chaid and Dr. B. Safi  
11:30 - 11:45 › Dispersion des suspensions concentrées du mélange kaolin / magnesite - Aghiles HAMMAS, Laboratoire de Traitement et Mise en Forme des Polymères  
11:45 - 12:00 › Nondestructive tests to estimate self-compacting concrete compressive strength - BOUKHELKHAL Djamila, GMGC Laboratory  
12:00 - 12:15 › La synthèse de poly(Ɛ-caprolactone-co- oxide de propylene) catalysée par la Maghnite-H+, un catalyseur vert à base de montmorillonite. - Abdelghani Bouchama, Centre de Recherche Scientifique et Technique en Analyses Physico-Chimiques CRAPC  
12:15 - 12:30 › Etude de la capacité de reprise des bétons ordinaires et des bétons autoplaçants - Tourkia Guerzou,  
11:30 - 12:30 Poster Session (Salle - RDC) - Poster Session V  
12:30 - 13:30 Lunch (Restaurant -Hotel)  
13:30 - 15:15 Topic 1: Advanced Materials and Nanotechnology (Salle A) - Chairman: Pr. M.S. El-Shall, Pr. A. Oudia and Pr. M. Bououdina  
13:30 - 13:45 › Electronic and thermoelectric properties of CdSnAs2 - Siziani Nacera, Laboratoire de Physique Quantique de la Matière et Modélisation Mathematique (LPQ3M)  
13:45 - 14:00 › BIONANOCOMPOSITES PHBV / CLOISITE 30B: EFFECTS OF ACCELERATED PHOTOOXYDATION ON MORPHOLOGY, MOLECULAR STRUCTURE AND THERMAL PROPERTIES - Kahina IGGUI, University Of BOUIRA  
14:00 - 14:15 › EFFET OF THE SUBSTRATE'S TEMPERATURE ON THE CHARACTERISTICS OF TiN THIN FILMS DEPOSITEED BY REACTIVE CATHODIC SPRAYING FOR SOLAR CELLS APPLICATIONS - Bachir Eddine MESSAID, Univ. M'hamed Bougara of Boumerdes  
14:15 - 14:30 › EFFECT OF THE ANNEALING TEMPERATURE ON THE PROPERTIES OF EVAPORATED VANADIUM OXIDE THIN FILMS - Fariza FERHATI, University Mouloud Mammeri of Tizi Ouzou  
14:30 - 14:45 › Studies of the interaction of factors on the colloidal stability of lipidic nanoparticles - Fouzia Gherrak, Laboratery of Functional Analysis of Chemical Processes  
13:30 - 15:15 Topic 2: Materials Chemistry and Building Materials (Salle B) - Chairman: Pr. R. Chaid, Pr. Bali and Pr. C. Derail  
13:30 - 13:45 › MODELING OF THE INTERFACE BETWEEN CONCRETE AND FIBERS GRID IN CONCRETE SLABS - Fatma Bouzeboudja, Université Mouloud Mammeri de Tizi Ouzou  
13:45 - 14:00 › FRACTAL DIMENSION OF ROUGHNESS: INFLUENCE OF GRAIN SIZE AND GRANULAR CLASS - Houria Bouzeboudja, Mouloud Mammeri University of Tizi-Ouzou  
14:00 - 14:15 › COPOLYMERISATION DU PYRROLE AVEC LE N,N-DIMETHYLE-AMINOBENZALDEHYDE PAR LA MAGHNITE-H+ - GHERRAS hammou, Laboratoire de chimie Organique, Macromoléculaire et des Matériaux  
14:15 - 14:30 › Mechanical behavior of self-compacting concrete at elevated curing temperature : effect of mineral admixtures - BOUKHELKHAL Djamila, GMGC Laboratory  
13:30 - 15:30 Topic 3: Waste Management, Recycling and Environment (Salle C) - Chairman: Pr. A. Ayadi, Dr. R. Benzerga and R. Kheribet  
13:30 - 13:45 › Traitement des eaux colorées par des billes de chitosane extrait des déchets de crevettes - DIHIA AILI, Faculté des Sciences. Université Mouloud Mammeri de Tizi Ouzou  
13:45 - 14:00 › Optimization of diauxienne growth of Pseudomonas aeruginosa in bioremediation of soils polluted by hydrocarbons - Bassirou Mahamadou Harouna, Biomatrials and Transport Phenomena Laboratory, University Dr Yahia Fares of Medea  
14:00 - 14:15 › Tolerance to organic pollutants in the duckweed, Lemna gibba L: Case study on textile dyes - Hocini Imene, Badji Mokhtar University, Annaba  
14:15 - 14:30 › Biosorption of the anionic dye Direct Red 89 by the aquatic plant Callitirche Obtusangula - Benabbas khaled, Badji Mokhtar University, Annaba  
14:30 - 14:45 › USE OF RECYCLED PP FIBRES IN CONCRETE - Khadra Bendjillali, University Amar Telidji of Laghouat  
14:45 - 15:00 › PHYSICAL AND THERMAL PROPERTIES OF DUNE SAND CONCRETE CONTAINING SPENT COFFEE GROUNDS - Mohamed Guendouz, LME Laboratory, University of Medea  
15:00 - 15:15 › RECYCLING OF RUBBER WASTE IN SAND CONCRETE - Mohamed Guendouz, LME Laboratory, University of Medea, Medea  
15:15 - 15:30 › Enhanced performance of Fe-JUL-15 prepared by untrasonic method through the photo-degradation of ibuprofen - Boudjemaa Amel, CRAPC (Algeria)  
13:30 - 15:15 Topic 4: Materials Processing Technology (Salle D) - Chairman: Pr. M. Saidi, Dr. H. Mechakra and Dr. A. Chelil  
13:30 - 13:45 › A new technique for the evaluation of the parameters of GaAlAsSb(p)/GaAlAsSb(n)/InAsSb double interface from current-voltage curve analysis. - khaled Mahi, Université des Sciences et de la Technologie Mohamed Boudiaf d'Oran  
13:45 - 14:00 › DRUG RELEASE MODULATION FROM EXTENDED RELEASE MATRICES USING BINARY MIXTURES OF POLYVINYL ALCOHOL AND SODIUM CARBOXYMETHYLCELLULOSE - Ouazib Farid, University of Science and Technology Houari Boumediene  
14:00 - 14:15 › Influence of deposition time on the CdS thin films prepared by a chemical bath deposition (CBD) - Djedjiga HAOUANOH, URMPE Unit, M'hamed Bougara University of Boumerdes  
14:15 - 14:30 › Proposition d'un modèle rhéologique pour le béton autoplaçant (BAP) - Tarek NAADIA, EPAU  
14:30 - 14:45 › EXACT SOLUTION OF THE BUCKLING PROBLEM OF FGM THICK PLATES - BACHIR BOUDERBA, Department of Civil Engineering  
14:45 - 15:00 › Etude comportementale d'un joint ‘'Spi'' en polytétrafluoroéthylène renforcé aux fibres de verre - Mokhtar BOUNAZEF, Laboratoire de Modélisation numérique et expérimentale des phénomènes mécaniques  
15:00 - 15:15 › RÔLE D'HYDROXYAPATITES PREPARES DANS LE TRAITEMENT PAR PHOTOCATALYSE D'EAUX CONTAMINEES PAR LA TETRACYCLINE - Lamia Khenniche, Université de Bejaia  
13:30 - 15:00 Poster Session (Salle - RDC) - Poster Session VI  
15:15 - 15:45 Closing of ISMSD 2017 symposium (Conference Room - Boumerdes University) - Pr. Abdellatif ZERIZER and Pr. Abdelbaki BENMOUNAH  
  
Online user: 2